The Hollow Wall Anchor is a special type of wall anchor that is designed to provide secure fastening into a hollow cavity wall. It can be used in plasterboard or plywood and is very sturdy. Unlike a traditional screw, which will fall out if the screw is removed, the Hollow is permanently fixed to the wall. It is an excellent choice for fixtures that require periodic removal, such as light fittings or shelving. The anchor is available in various sizes, grip ranges, and drill sizes, so the user can choose the size of hole that they need for a particular fixture.

To install the Hollow Wall Anchor, drill a small pilot hole in the wall and insert the anchor into the hole. Turn the screw clockwise to spread the wings of the anchor. Once the screw is inserted into the hole, you can then screw in the object that you want to mount. To remove the installation, you can loop the wire hanger around the hole and then unscrew the anchor. This will allow you to remove the mounted object.

Once you have chosen the size, drill a pilot hole in the wall. Then insert the Hollow Wall Anchor into the hole. You must then turn the screw in a clockwise direction until the object is fully engaged with the wing. Once the hole is completely closed, unscrew the screw and remove the anchor from the wall. This installation is a simple process, and it only takes a few minutes. If you are a novice in using anchors, consider purchasing a set of anchors to try it out. Then, you can purchase your next anchor as you go along.

Choosing a type of anchor is crucial to the success of a job. The Hollow Wall Anchor has wings behind the drywall, so it is best to use small ones. If the item is very heavy, you may have to buy several different types of anchors. This way, you can be sure that each anchor will fit the project perfectly. And if you need to mount a large item, it is important to check the size of the object before you purchase it.

If you aren't confident about your ability to screw the anchor into the wall, consider hiring a professional. A professional will be able to provide you with a proper installation. If you need to drill a hole, use a screw driver. Then, a hollow wall anchor will be installed into the wall. It will not cause any visible holes in the wall, but it will fix any problem. In case of a large item, you may need to use more than one.

The Hollow Wall Anchor works with the same principle as the pop rivet. The anchor is inserted into the wall using a machine screw, which spreads to fix the wall cavity. After the anchor has expanded, you must not pull the anchor back, or it will be a waste of time. A hollow wall-anchor can easily be installed by a handyman. So, if you are not an experienced handyman, you can use the Hollow-Wall-Anchor to fix your picture and other things.